Setting up your NS2 Air Monitors 

 
We are happy to see that you have chosen the NS2 as your speakers and we want to help you get the most out of them. 

 

The Nocs NS2 Air Monitors are a set of active speakers with AirPlay technology, allowing you to stream music wirelessly from your Mac, PC, iPod touch, iPhone and iPad. Turn your device into the ultimate music experience and enjoy the powerful sound from the NS2.

 

Using the NS2 and AirPlay

Once the setup is finished, the NS2 can be fully operated wirelessly by AirPlay from a Mac, PC or iOS device by selecting the NS2 from either the device menu in the bottom right corner of the program window or next to the volume control in your app.

 

SWITCHING ON AND OFF

Switch on the NS2 by pressing the “Power” button located on the right side speaker’s rear panel.  If the NS2 has not been setup before, the LED flashes green quickly for about 30 seconds while booting up, followed by flashing green slowly to indicate that the NS2 is ready to be setup. If the NS2 has already been properly setup, the LED flashes green quickly for about 30 seconds while booting up, followed by flashing green slowly for 5 seconds. When the LED turns solid green followed by a beep, the NS2 is connected to the wireless network.  To switch off, press the “Power” button.

 

FIRST TIME SETUP

There are 3 different ways to setup your speakers to the WiFi network. Please choose the most convenient one for you.


Simple setup using USB cable (iOS only)

  1. Switch on the NS2.
  2. The LED flashes green quickly for about 30 seconds while booting up.
  3. The LED flashes green slowly to indicate that the NS2 is ready for setup. 
  4. Connect your iOS device to the Service port with USB cable Press the “Setup” + “Source” button, the LED will flash red/green/blue Allow your device to share your WiFi settings to connect the NS2 to the WiFi network. 
  5. The LED turns solid green followed by a beep to indicate that the NS2 is connected to the wireless network.

Setup using Nocs NS2 Air Monitors App (iOS and Android)

  1. Download the Nocs NS2 Air Monitor app on the App Store or Google Play
    iOS: https://itunes.apple.com/us/app/nocs/id670190671?mt=8
    Android: https://play.google.com/store/apps/details?id=com.nocs
  2. Switch on the NS2.
  3. The LED flashes green quickly for about 30 seconds while booting up.
  4. The LED flashes green slowly to indicate that the NS2 is ready for setup. 
  5. Press the “Setup” button on the right side speaker’s rear panel for five (5) seconds, the LED will flash green and blue to indicate the WiFi setup is ready to begin.
  6. Open the Nocs NS2 Air Monitor app on your iOS or Android device and follow the simple guide to set-up your NS2 speakers to the WiFi network.

 

The NS2 supports DHCP and will automatically re-connect to the wireless network after the first-time setup.  

Moving the NS2 to a new wireless network or changing the wireless network settings requires a new setup.

Make sure your NETWORK NAME and PASSWORD only contains English letters and numbers and NO SPACES or special characters, spaces can be replaced by underline. (For example Nocs_Network)

 

SETUP VIDEO

Setup using the NS2 temporary wireless network

  1. Make sure you know the name and password of your wireless network before you start. 
  2. Switch on the NS2.
  3. Make sure the antenna on the back panel is flipped upwards.
  4. The LED flashes green quickly for about 30 seconds while booting up. 
  5. The LED flashes green slowly indicating that the NS2 is ready for setup.
  6. Press and hold the “Setup” button for five (5) seconds. The LED flashes green and blue slowly indicating that the NS2 has entered manual setup mode.
  7. Connect your Mac, PC, iOS or Android device to the “Nocs_NS2_Setup“ wireless network.
  8. Open “http://192.168.1.1” in a browser.
  9. If you wish to change the name of the NS2, type in the selected name in the “AirPlay device name” box and click “Update”, then return to the “Network Configuration”.
  10. Select the wireless network (SSID) to which the NS2 should be connected and enter the network password. Use “Advanced” settings if needed. Press “Apply”.
  11. The LED flashes green quickly while the NS2 is rebooting, followed by flashing green slowly while connecting. 
  12. The LED turns solid green followed by a beep to indicate that the NS2 is connected to the wireless network.
  13. Reconnect your Mac, PC, iOS or Android device to your wireless network again.

It is recommended that the DHCP checkbox remains checked.

In areas with a lot of Wi-Fi interference, connecting to the NS2 wireless network sometimes requires more than one attempt.

 

Apple Extreme NS2 setup 

If you are having issues with the setup of you NS2's please review the Apple Extreme settings.


For Lion operating system.

 

Open Macintosh HD > Applications > Utilities > AirPort Utility 

Click on the AirPort Extreme icon, then click Edit

Click the Wireless tab at the top of the window

Click the Wireless options button

Edit the 2.4 GHz Channel and 5 GHz Channel accordingly by clicking on the selection box to 
change the setting from Automatic to a channel that you choose

Click Save, then click Update and allow 25-30 seconds for the AirPort Extreme to restart

 

 

For Leopard or Snow Leopard.


Open Macintosh HD > Applications > Utilities > AirPort Utility

Select the AirPort Extreme and click Manual Setup

Click the Wireless tab below the row of icons

Edit the Radio Channel selection box by click Manual, then Edit

Change the 2.4 GHz and 5 GHz Channel accordingly

Click Done, then click Update and allow 25-30 seconds for the AirPort Exteme to restart